Scaffolding Tubes and Pipes: What do You Need to Know?

 Metal pipe pieces called scaffolding tubes are used to build a scaffold, which is a support system set up outside of buildings and other structures being built. By climbing these improvised frameworks and standing on platforms, scaffolding enables workers to safely access the upper levels of a building or structure.

Because scaffolding tubes are available in different lengths from scaffolding pipe manufacturers in Mumbai, the scaffolding's structure can be altered to suit a particular job. Couplers, which are used to hold them together, can differ in size and function based on the application for which they are being used.

What are various scaffolding tubes types?

Scaffolding tubes come in three different general categories: standards, ledgers, and transoms. The vertical scaffolding tubes that serve as standards will support the entire structure. Ledgers, on the other side, provide lateral support by running horizontally, typically between the standards.

Transoms, which are smaller support tubes that run parallel to ledgers, are used to strengthen the structure and provide a surface for mounting platforms. Couplers connect each of these various scaffolding tube types, preventing excessive flex or movement once the structure is finished. Due to the modular nature of the tubes and couplers, various shapes, heights, lengths, and widths of structures can be created.

What are scaffolding tubes made of?

Scaffolding tubes supplied by scaffolding pipes suppliers in Mumbai are typically made of steel and aluminum. Although steel tubes are frequently heavier, they are also incredibly strong. Moreover, aluminum tubes are much lighter than steel tubes, they are not as strong.

Composite tubes, on the other sides, are occasionally used, but they are rarely chosen over steel tubes because of their high cost. Scaffolding tubes are typically sold at a set length, usually around 20 feet (6.3 meters), and are then cut to that length fairly simply. The thickness of the walls can determine how much weight the finished structure can support, and the width is typically a standard size as well.

Steel tubes are typically galvanized by tubing pipe manufacturers in Mumbai. This indicates that they are zinc-coated, which will help stop rust and corrosion brought on by exposure to the elements. Due to aluminum's relative resistance to rust and corrosion, galvanizing aluminum tubes is typically not necessary.

Steel that has not been galvanized by scaffolding pipe manufacturers is typically painted or given another chemical treatment to guard against weather damage. Aluminum is more brittle and less likely to bend back into shape after an impact than steel, which does have a tendency to bend when impacted but can be bent back into shape fairly easily.

Scaffolding tubes types used in construction

1. Single Scaffolding

Single scaffolding offered by scaffolding pipes suppliers in Mumbai, also known as bricklayer scaffolding, is typically used for brick masonry. Standards, ledgers, putlogs, and other scaffolding components make up single scaffolding that is 1.2 meters away from the wall and parallel to it.

Ledgers connect the standards at 1.2 to 1.5 m vertical intervals. To one end of the ledgers, putlogs are removed from the hole that was left in the wall. Moreover, putlogs are positioned every 1.2 to 1.5 meters.

2. Double scaffolding

Due to its frequent use in stone masonry, double scaffolding is also known as mason's scaffolding. It’s understood that it is challenging to drill putlog support holes in stone walls. To strengthen it, two rows of scaffolding are built by tubing pipe manufacturers in Mumbai.

The first row is 20 to 30 cm from the wall, and the second row is one meter away. Once done, putlogs that are supported by both frames are placed. Moreover, rakers and cross braces are provided to increase their strength.